MC74ACT377N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 140MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MC74ACT377N Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. It is contained within the Tubepackage. Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74ACT series. A frequency of 140MHzshould not be exceeded by its output. A total of 1 elements are present. There is a consumption of 8μAof quiescent energy. There have been 20 terminations. The D flip flop is powered by a voltage of 5V . Its input capacitance is 4.5pF farads. The electronic device belongs to the ACTfamily. Vsup reaches its maximum value at 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V.
MC74ACT377N Features
Tube package
74ACT series
MC74ACT377N Applications
There are a lot of Rochester Electronics, LLC MC74ACT377N Flip Flops applications.
- Synchronous counter
- ESCC
- Frequency division
- Data storage
- Shift Registers
- Bus hold
- Count Modes
- Balanced Propagation Delays
- Supports Live Insertion
- Shift registers
