MC74ACT377NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 3 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74ACT377NG Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. The package Tubecontains it. As configured, the output uses Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Through Holeis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74ACTseries of FPGAs. A frequency of 140MHzshould not be exceeded by its output. A total of 1elements are contained within it. It consumes 8μA of quiescent Terminations are 20. Members of the 74ACT377family make up this object. A voltage of 5V is used to power it. A JK flip flop with a 4.5pFfarad input capacitance is used here. Devices in the ACTfamily are electronic devices. There is an electronic part mounted in the way of Through Hole. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. There are 8bits in this flip flop. The superior flexibility of this circuit is achieved by using 8 circuits. A total of 5V power supplies are needed to run it. In order to achieve high efficiency, the supply voltage should be maintained at 5V.
MC74ACT377NG Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT377NG Applications
There are a lot of ON Semiconductor MC74ACT377NG Flip Flops applications.
- Bounce elimination switch
- Individual Asynchronous Resets
- Computers
- ESD protection
- Load Control
- Instrumentation
- Frequency division
- Buffer registers
- Frequency Divider circuits
- Storage registers
