MC74ACT564N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2015 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT564 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 85MHz |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 2 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT564N Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). The Tubepackage contains it. T flip flop uses Tri-State, Invertedas the output. Positive Edgeis the trigger it is configured with. Through Holeis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74ACT series. Its output frequency should not exceed 85MHz Hz. In total, it contains 1 elements. There is a consumption of 8μAof quiescent energy. The number of terminations is 20. The 74ACT564 family contains this object. It is powered by a voltage of 5V . This T flip flop has a capacitance of 4.5pF farads at the input. Electronic devices of this type belong to the ACTfamily. This electronic part is mounted in the way of Through Hole. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. The flip flop is designed with 8bits. The maximal supply voltage (Vsup) reaches 5.5V. Normal operation requires a supply voltage (Vsup) above 4.5V. In order to achieve its superior flexibility, 8 circuits are used. The D latch runs on a voltage of 5V volts. The D flip flop has no ports embedded. In order for the chip to function, it has 3output lines.
MC74ACT564N Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT564N Applications
There are a lot of ON Semiconductor MC74ACT564N Flip Flops applications.
- Frequency Dividers
- Latch
- Common Clocks
- Balanced 24 mA output drivers
- Dynamic threshold performance
- Power down protection
- Memory
- Control circuits
- Synchronous counter
- Pattern generators
