MC74ACT573DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 10.5 ns |
| Family | ACT |
| Logic Function | Buffer, D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74ACT573DTR2G Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). Packaged in the way of Tape & Reel (TR). The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. The 74ACT series of FPGAs is the one this FPGA belongs to. There are 8 bits in this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74ACT573. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. This electronic device belongs to the family of ACT. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. In the subcategory FF/Latches, this part belongs. The system is powered by 5V sources. Electronic circuits comprise 8 input lines. This device is well suited for TAPE AND REEL based on its reliable performance. Optimal efficiency requires 5V as the supply voltage. There are 3 output lines that correspond to the binary equivalents of the input line.
MC74ACT573DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
MC74ACT573DTR2G Applications
There are a lot of ON Semiconductor MC74ACT573DTR2G Latches applications.
- Automotive Infotainment
- PCs and Notebooks
- Four-bit storage with output enable
- Buffer register
- Shift Registers
- Hammer Device Information
- Instrumentation
- Decade counting 7-segment decimal display
- Watches
- General-Purpose Register
