MC74ACT573N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 10.5 ns |
| Family | ACT |
| Logic Function | Buffer, D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT573N Overview
In the package 20-DIP (0.300, 7.62mm), it can be found. Tube is the packaging method. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Based on the way of Through Hole, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. The operating temperature is -40°C~85°C. An FPGA of this type belongs to the 74ACT series. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. The family in which it belongs to is 74ACT573. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. It is a member of the ACT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Through Hole method. This device has a total of 2 ports. Subcategory FF/Latches includes this part. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. There is 5V power supply for it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to RAIL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
MC74ACT573N Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
MC74ACT573N Applications
There are a lot of ON Semiconductor MC74ACT573N Latches applications.
- Shift right register
- Motor Drives
- Shift left with parallel loading
- Accumulator Registers
- Parallel data synchronization
- Clocks
- Flip-flops
- Bus system register with enable parallel lines at bus side
- Parallel data storage
- Counting
