MC74ACT574MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74ACT574MELG Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74ACTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 100MHz. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. Currently, there are 20 terminations. It is a member of the 74ACT574 family. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 4.5pF farads. In terms of electronic devices, this device belongs to the ACTfamily of devices. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. An electronic part designed with 8bits is used in this application. Its flexibility is enhanced by 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. The flip flop has 2ports embedded within it. In order to ensure high efficiency, the supply voltage should remain at 5V. To operate, the chip has a total of 3 output lines.
MC74ACT574MELG Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT574MELG Applications
There are a lot of ON Semiconductor MC74ACT574MELG Flip Flops applications.
- Single Up Count-Control Line
- Clock pulse
- Storage Registers
- Modulo – n – counter
- Memory
- Frequency division
- ESCC
- Asynchronous counter
- Patented noise
- Consumer
