MC74ACT574NG
| Parameters | |
|---|---|
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 100MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
MC74ACT574NG Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. D flip flop is embedded in the Tube package. This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74ACTseries of FPGAs. A frequency of 100MHzshould not be exceeded by its output. The element count is 1 . It consumes 8μA of quiescent A total of 20terminations have been recorded. It is powered by a voltage of 5V . A JK flip flop with a 4.5pFfarad input capacitance is used here. This D flip flop belongs to the family of ACT. 5.5Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 4.5V for normal operation. There are 2 ports embedded in the flip flops.
MC74ACT574NG Features
Tube package
74ACT series
MC74ACT574NG Applications
There are a lot of Rochester Electronics, LLC MC74ACT574NG Flip Flops applications.
- Count Modes
- Consumer
- Buffer registers
- Convert a momentary switch to a toggle switch
- ESD performance
- Safety Clamp
- Data Synchronizers
- Differential Individual
- Shift Registers
- Modulo – n – counter
