MC74ACT74D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Voltage | 6V |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 210MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 5.5 ns |
| Family | ACT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT74D Overview
It is embeded in 14-SOIC (0.154, 3.90mm Width) case. The Tubepackage contains it. This output is configured with Differential. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ACTseries of FPGAs. Its output frequency should not exceed 210MHz. The element count is 2 . During its operation, it consumes 4μA quiescent energy. A total of 14 terminations have been made. The object belongs to the 74ACT74 family. It is powered by a voltage of 5V . Input capacitance of this device is 4.5pF farads. An electronic device belonging to the family ACTcan be found here. A part of the electronic system is mounted in the way of Surface Mount. 14pins are included in its design. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. The flip flop is designed with 1bits. In this case, the maximum supply voltage (Vsup) reaches 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. The power supply is 5V. This input has 1lines in it.
MC74ACT74D Features
Tube package
74ACT series
14 pins
1 Bits
5V power supplies
MC74ACT74D Applications
There are a lot of ON Semiconductor MC74ACT74D Flip Flops applications.
- Buffer registers
- CMOS Process
- Single Up Count-Control Line
- Cold spare funcion
- Modulo – n – counter
- Bounce elimination switch
- Control circuits
- ESD performance
- Counters
- Pattern generators
