MC74ACT86DTR2G
| Parameters | |
|---|---|
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT86 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 9.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 9.5 ns |
| Family | ACT |
| Logic Function | OR, XNOR, XOR |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | XOR (Exclusive OR) |
| Number of Gates | 4 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MC74ACT86DTR2G Overview
Due to its 14-TSSOP (0.173, 4.40mm Width) packaging, the part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). XOR (Exclusive OR) logic governs its operation. A voltage of 4.5V~5.5V is needed to ensure full function of the part. Around -40°C~85°C is the extended operating temperature. In Surface Mount, the part is mounted. 24mA 24mA is the output current's high and low states. The number 74ACT refers to it. Total terminations are 14. 4 functions in the part enhance the user experience significantly. The chip is a part of ACT. Try searching with 74ACT86 to find device variants. 14 pins are injected into the part body. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. Please refer to the datasheets for 14 pins functions. There are 2 inputs on this part. As the part is in a quiescent state, it has 4μA current flowing through it. This logic device is a typical Gates. It has a load capacitance of 50pF. The method TAPE AND REEL has been incorporated into the package. A 5V power supply is specified in the datasheet for this part. In this device, there are 1 outputs. The operating supply voltage for the chip is specified as 5V volts, which corresponds to the chip voltage. Operation through gates with a value of 4.
MC74ACT86DTR2G Features
XOR (Exclusive OR) Logic Type
Operating Temperature: -40°C~85°C
ACT Family
Quiescent Current: 4μA
4 Gates
MC74ACT86DTR2G Applications
There are a lot of ON Semiconductor MC74ACT86DTR2G Gates and Inverters applications.
- Electrical tools
- Solar street light
- Illumination
- In-vehicle system
- Fax machine
- Grid adaptation function
- Troubleshooting & Judgment
- Roof distributed power station
- Pocket PC
- Reactive power compensation function
