MC74HC112ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Propagation Delay | 235 ns |
| Turn On Delay Time | 26 ns |
| Family | HC/UH |
| Logic Function | AND, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC112ADTR2G Overview
As a result, it is packaged as 16-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Differential. JK flip flop uses Negative Edgeas the trigger. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. It is operating at -55°C~125°C TA. There is JK Type type of electronic flip flop associated with this device. The 74HCseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 35MHz. Despite external influences, it consumes 4μAof quiescent current. There are 16 terminations,You can search similar parts based on 74HC112. A voltage of 5V is used as the power supply for this D latch. This JK flip flop has a 10pFfarad input capacitance. HC/UHis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. There are 16pins on it. The clock edge trigger type for this device is Negative Edge. It is part of the FF/Latchesbase part number family. In this case, the maximum supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be kept above 2V. 2 circuits are used to achieve its superior flexibility. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL.
MC74HC112ADTR2G Features
Tape & Reel (TR) package
74HC series
16 pins
MC74HC112ADTR2G Applications
There are a lot of ON Semiconductor MC74HC112ADTR2G Flip Flops applications.
- Balanced 24 mA output drivers
- High Performance Logic for test systems
- 2 – Bit synchronous counter
- Data transfer
- Instrumentation
- Convert a momentary switch to a toggle switch
- EMI reduction circuitry
- Latch
- Computing
- Count Modes
