MC74HC139ANG
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Tin (Sn) |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC139 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Output Type | TTL |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Throw Configuration | DP4T |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 175 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 35 ns |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 3.429mm |
| Length | 19.5326mm |
| Width | 6.858mm |
| Radiation Hardening | No |
MC74HC139ANG Overview
In order to save board space, digital switch is located in the 16-DIP (0.300, 7.62mm).The package is packaged in the manner of Tube.digital switch ic uses the method of Through Hole for mounting.In the multiplexers, the analog IC Decoder/Demultiplexer is used.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74HC series can be used for a wide range of applications.Among its basic configurations are 16 terminations.In addition, it also has a base part number of 74HC139, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch consists of 16 component pins.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 16 pin configuration.The mounting point is Through Hole.Among the family of HC/UH the logic switch is a member.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.The turn signal switch has 8 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without external influences, it consumes 4μA current of multiplexer ic.A voltage level can be inserted into the 1 input lines of multiplexers.There are 4 output lines on the signal source.In the mux switch configuration, there are 2 elements.
MC74HC139ANG Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
1 input lines
4 output lines
MC74HC139ANG Applications
There are a lot of ON Semiconductor MC74HC139ANG Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Electronic circuits
- Electronics industry
- Code converters
- Time division multiplexing system
- Seven segment displays
- VGA
- Microprocessor memory systems
- Speed synchronization of multiple motors in industries
- Analog to digital conversion
