MC74HC151ADTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Data Selector/Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer/Demultiplexers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Family | HC/UH |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 56 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC151ADTG Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Data Selector/Multiplexer.The operating temperature of -55°C~125°C will not be susceptible to external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HC series are suitable for a wide range of applications.Among its basic configurations are 16 terminations.There is a base part number of 74HC151 which can also be used in order to locate the logic switch that are related to this item.In this case, 4.5V is the voltage supplied to the multiplexer's system.There are 16 component pins in this turn signal switch.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the family of HC/UH.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.In order for 2/6V to operate normally, a power supply is provided.The turn signal switch has 1 outputs designed for operation.Multiplexer/Demultiplexers is the classification for this the digital switch ic.In this multiplexer, there is a total of 8 inputs.
MC74HC151ADTG Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
MC74HC151ADTG Applications
There are a lot of ON Semiconductor MC74HC151ADTG Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Used to connect a single source to multiple destinations
- Data communication
- PCIe
- Enabling different rows of memory depending on address in memory chips
- Analog, digital or video signal switching
- Data bus control
- VGA
- Arithmetic Logic Units
- Microprocessor input/output systems
