MC74HC151ADTR2G
| Parameters | |
|---|---|
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Data Selector/Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 450mW |
| Family | HC/UH |
| Logic Function | Multiplexer, Mux |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 56 ns |
MC74HC151ADTR2G Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Data Selector/Multiplexer.The operating temperature of -55°C~125°C will not be susceptible to external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 74HC series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 16 range.You can also find related parts by using its logic switch base part number of 74HC151.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemCurrently, this turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Single employed as part of this supply.It is configured with 16 pins.The mounting point is Surface Mount.In the HC/UH family, the logic switch is included.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.I would classify the digital switch ic as an electronic part belonging to the Multiplexer/Demultiplexers category.The switches package is packaged in a way which is consistent with TAPE AND REEL.It is possible to accept voltage levels by using one of the 8 input lines of multiplexers.There are 2 output lines on the signal source.
MC74HC151ADTR2G Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
8 input lines
2 output lines
MC74HC151ADTR2G Applications
There are a lot of ON Semiconductor MC74HC151ADTR2G Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Used to connect a single source to multiple destinations
- Automation system
- Relay
- Data communication
- D/A converters
- Electronics industry
- Encrypted communications system
- VGA
- Medical industry
