MC74HC157ANG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Data Selector/Multiplexer |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC157 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Throw Configuration | DPST |
| Propagation Delay | 18 ns |
| Family | HC/UH |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 3.429mm |
| Length | 19.5326mm |
| Width | 6.858mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC157ANG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-DIP (0.300, 7.62mm).As a result, it is packaged in a way that is referred to as Tube.Digital switch ic uses a Through Hole mounting method.As the analog part, the circuit uses an analog IC Data Selector/Multiplexer.The operating temperature of -55°C~125°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.Multiplexers in the 74HC series are suitable for a wide range of applications.The basic configuration includes 16 terminations.There is a base part number of 74HC157 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V volts.This turn signal switch has 16 component pins.As a type of supply, Single is employed.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Through Hole.The logic switch is a member of the HC/UH family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.Keeping Vsup at 6V will prevent some unnecessary failures.For the turn signal switch's operation, there are 4 outputs.The digital switch ic is an electronic part classified into Multiplexer/Demultiplexers.It is provided with 8 inputs.The switches package is packaged in a way which is consistent with RAIL.For the purpose of accepting voltage levels, the multiplexers have 2 input lines.
MC74HC157ANG Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
2 input lines
MC74HC157ANG Applications
There are a lot of ON Semiconductor MC74HC157ANG Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- Solenoid cooling fan
- Enabling block of memory depending on address in memory chips
- Combinational circuit
- High-performance memory systems
- Microprocessor memory systems
- RF-based home automation system
- Relay
- Make half adder
- Electronics industry
