MC74HC163AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 22 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| fmax-Min | 28 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Count Rate | 35MHz |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC163AN Overview
It is a device supplied in the 16-DIP (0.300, 7.62mm) package. In order to configure it, it uses 16terminations. This device is fully flexible due to the supply voltage of [0]. In this diagram, there are 1elements that are interconnected by wires. There are a total of 16 pins in all components. As a result, it is packaged in the way of a Tube. In the circuit, 16pins are used to connect other components. It is mounted in the way of [0]. In this case, it emerges as a member of the HC/UH family. Due to its membership in the 74HCseries, it is suitable for a variety of applications. In this case, the logic type is set to [0]. It is recommended that the operating temperature be set to -55°C~125°C TA. This device is mounted in the Through Holeposition. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. The array has 4elements. Under its base part number of [0], you will find additional related parts. The voltage source generates 2/6Vvoltage. There is 2V minimum supply voltage (Vsup) for this device. Typically, the supply voltage (Vsup) is limited to 6V.
MC74HC163AN Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
MC74HC163AN Applications
There are a lot of ON Semiconductor MC74HC163AN Counters & Dividers applications.
- Time Out Timer for Consumer-Application Industrial Controls
- Frequency dividing circuits
- TRUE RMS-TO-DC CONVERSION
- SQUARING
- Divide-by"N" counters/frequency synthesizers
- Analog multiplexing and demultiplexing
- VHF, UHF, FM, AM, etc.
- Programmable binary and decade
- Communications Digital Frequency Synthesizers;
- Dual Up Counters
