MC74HC174AD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 4.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC174 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 35MHz |
| Propagation Delay | 110 ns |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 6 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC174AD Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). Package Tubeembeds it. Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. This type of FPGA is a part of the 74HC series. It should not exceed 35MHzin its output frequency. In total, it contains 1 elements. It consumes 4μA of quiescent There have been 16 terminations. The 74HC174family includes it. Power is supplied from a voltage of 4.5V volts. JK flip flop input capacitance is 10pF farads. In this case, the D flip flop belongs to the HC/UHfamily. Electronic part Surface Mountis mounted in the way. This board has 16 pins. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. The design is based on 6bits. 6Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. The superior flexibility is achieved through the use of 7 circuits. As a result of its reliability, this D flip flop is ideally suited for RAIL. It is designed with 6 output lines.
MC74HC174AD Features
Tube package
74HC series
16 pins
6 Bits
MC74HC174AD Applications
There are a lot of ON Semiconductor MC74HC174AD Flip Flops applications.
- Frequency Dividers
- Guaranteed simultaneous switching noise level
- Bounce elimination switch
- Latch-up performance
- Counters
- Automotive
- Single Down Count-Control Line
- High Performance Logic for test systems
- Matched Rise and Fall
- Control circuits
