MC74HC174ADG
| Parameters | |
|---|---|
| Base Part Number | 74HC174 |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 6 |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 6 |
| Clock Frequency | 35MHz |
| Propagation Delay | 165 ns |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Current Rating | 4μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
MC74HC174ADG Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. T flip flop uses Non-Invertedas the output. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -55°C~125°C TA. This electronic flip flop is of type D-Type. It belongs to the 74HCseries of FPGAs. A frequency of 35MHzshould not be exceeded by its output. A total of 1elements are contained within it. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74HC174 family. A voltage of 5V provides power to the D latch. A JK flip flop with a 10pFfarad input capacitance is used here. It belongs to the family of electronic devices known as HC/UH. There is an electronic component mounted in the way of Surface Mount. There are 16pins on it. This device's clock edge trigger type is Positive Edge. It is included in FF/Latches. There are 6bits in this flip flop. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. Using 7 circuits, it is highly flexible. Considering its reliability, this T flip flop is well suited for RAIL. Featuring the maximum design flexibility, it has an output current of 5.2mA . There are 6 channels available.
MC74HC174ADG Features
Tube package
74HC series
16 pins
6 Bits
MC74HC174ADG Applications
There are a lot of ON Semiconductor MC74HC174ADG Flip Flops applications.
- Data Synchronizers
- Patented noise
- Individual Asynchronous Resets
- Set-reset capability
- ESCC
- Memory
- QML qualified product
- Test & Measurement
- Buffered Clock
- Convert a momentary switch to a toggle switch
