MC74HC174ADR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 4.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC174 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 35MHz |
| Propagation Delay | 110 ns |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Trigger Type | Positive Edge |
| Number of Output Lines | 6 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC174ADR2 Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). As part of the package Cut Tape (CT), it is embedded. As configured, the output uses Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. A 2V~6Vsupply voltage is required for it to operate. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74HCseries of FPGAs. It should not exceed 35MHzin terms of its output frequency. A total of 1elements are contained within it. Terminations are 16. The 74HC174 family contains this object. The power source is powered by 4.5V. HC/UHis the family of this D flip flop. It is mounted by the way of Surface Mount. The 16pins are designed into the board. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 6 Bits. The maximal supply voltage (Vsup) reaches 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. To achieve this superior flexibility, 7 circuits are used. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The JK flip flop is with 6 output lines to operate.
MC74HC174ADR2 Features
Cut Tape (CT) package
74HC series
16 pins
6 Bits
MC74HC174ADR2 Applications
There are a lot of ON Semiconductor MC74HC174ADR2 Flip Flops applications.
- Modulo – n – counter
- Load Control
- EMI reduction circuitry
- Guaranteed simultaneous switching noise level
- Buffered Clock
- Memory
- Synchronous counter
- Buffer registers
- Computing
- Differential Individual
