MC74HC174AFELG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Supplier Device Package | 16-SOEIAJ |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 35MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
MC74HC174AFELG Overview
The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. As configured, the output uses Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. A supply voltage of 2V~6V is required for operation. The operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. You should not exceed 35MHzin its output frequency. A total of 1elements are contained within it. During its operation, it consumes 4μA quiescent energy. This T flip flop has a capacitance of 10pF farads at the input.
MC74HC174AFELG Features
Tape & Reel (TR) package
74HC series
MC74HC174AFELG Applications
There are a lot of Rochester Electronics, LLC MC74HC174AFELG Flip Flops applications.
- Pattern generators
- Frequency Divider circuits
- Frequency division
- High Performance Logic for test systems
- Divide a clock signal by 2 or 4
- Count Modes
- Consumer
- Parallel data storage
- Bus hold
- Computers
