MC74HC174AFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC174 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 35MHz |
| Propagation Delay | 110 ns |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 6 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2.05mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC174AFELG Overview
As a result, it is packaged as 16-SOIC (0.209, 5.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. It is configured with Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. It is operating at a temperature of -55°C~125°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. The list contains 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74HC174 family. It is powered from a supply voltage of 4.5V. A JK flip flop with a 10pFfarad input capacitance is used here. In this case, the D flip flop belongs to the HC/UHfamily. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 16 pins. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 6bits is used in this application. There is a 6Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 7 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It has 6 output lines to operate.
MC74HC174AFELG Features
Tape & Reel (TR) package
74HC series
16 pins
6 Bits
MC74HC174AFELG Applications
There are a lot of ON Semiconductor MC74HC174AFELG Flip Flops applications.
- Automotive
- Single Down Count-Control Line
- Registers
- Power down protection
- Clock pulse
- Storage Registers
- Test & Measurement
- High Performance Logic for test systems
- Supports Live Insertion
- Circuit Design
