MC74HC174ANG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 24 MHz |
| Height Seated (Max) | 4.44mm |
| RoHS Status | ROHS3 Compliant |
MC74HC174ANG Overview
It is embeded in 16-DIP (0.300, 7.62mm) case. Package Tubeembeds it. It is configured with Non-Invertedas an output. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. A temperature of -55°C~125°C TAis used in the operation. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74HCseries of FPGAs. You should not exceed 35MHzin its output frequency. D latch consists of 1 elements. There is a consumption of 4μAof quiescent energy. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 5V is used to power it. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family HC/UHcan be found here. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V.
MC74HC174ANG Features
Tube package
74HC series
MC74HC174ANG Applications
There are a lot of Rochester Electronics, LLC MC74HC174ANG Flip Flops applications.
- Matched Rise and Fall
- Latch
- Divide a clock signal by 2 or 4
- Communications
- Modulo – n – counter
- Frequency Divider circuits
- Data transfer
- Patented noise
- Computers
- Differential Individual
