MC74HC175ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 1 |
| Clock Frequency | 35MHz |
| Propagation Delay | 225 ns |
| Turn On Delay Time | 28 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC175ADG Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). It is contained within the Tubepackage. This output is configured with Differential. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. FPGAs belonging to the 74HCseries contain this type of chip. You should not exceed 35MHzin its output frequency. D latch consists of 1 elements. This process consumes 4μA quiescents. A total of 16 terminations have been made. JK flip flop belongs to 74HC175 family. The power supply voltage is 5V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family HC/UHcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. There are 1bits in this flip flop. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. Considering its reliability, this T flip flop is well suited for RAIL. The power supply is 2/6V. With an output current of 5.2mA, this device offers maximum design flexibility. There are 4 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The number of channels is growing strong/weak: 4.
MC74HC175ADG Features
Tube package
74HC series
16 pins
1 Bits
2/6V power supplies
MC74HC175ADG Applications
There are a lot of ON Semiconductor MC74HC175ADG Flip Flops applications.
- Common Clocks
- Event Detectors
- Shift registers
- Frequency division
- Consumer
- ESD protection
- Guaranteed simultaneous switching noise level
- Computers
- Set-reset capability
- Asynchronous counter
