MC74HC175ADR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 35MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 28 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC175ADR2 Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. A temperature of -55°C~125°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74HC series. It should not exceed 35MHzin terms of its output frequency. D latch consists of 1 elements. There is a consumption of 4μAof quiescent energy. A total of 16terminations have been recorded. The 74HC175 family contains it. The power supply voltage is 3V. A 10pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the HC/UHfamily. It is mounted in the way of Surface Mount. This board is designed with 16pins on it. In this device, the clock edge trigger type is Positive Edge. The part is included in FF/Latches. 4bits are used in its design. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 2V. Despite its superior flexibility, it relies on 4 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It operates from 2/6V power supplies.
MC74HC175ADR2 Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
2/6V power supplies
MC74HC175ADR2 Applications
There are a lot of ON Semiconductor MC74HC175ADR2 Flip Flops applications.
- Matched Rise and Fall
- Storage registers
- Consumer
- Frequency Divider circuits
- Count Modes
- EMI reduction circuitry
- Divide a clock signal by 2 or 4
- Balanced 24 mA output drivers
- Memory
- Functionally equivalent to the MC10/100EL29
