MC74HC175ADTR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 225 ns |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MC74HC175ADTR2 Overview
As a result, it is packaged as 16-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. This output is configured with Differential. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. A 2V~6Vsupply voltage is required for it to operate. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. A total of 1elements are present in it. As a result, it consumes 4μA of quiescent current without being affected by external factors. The number of terminations is 16. Power is provided by a 5V supply. This JK flip flop has a 10pFfarad input capacitance. An electronic device belonging to the family HC/UHcan be found here. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be kept above 2V for normal operation.
MC74HC175ADTR2 Features
Tape & Reel (TR) package
74HC series
MC74HC175ADTR2 Applications
There are a lot of Rochester Electronics, LLC MC74HC175ADTR2 Flip Flops applications.
- Safety Clamp
- Set-reset capability
- Count Modes
- Clock pulse
- Matched Rise and Fall
- Instrumentation
- Latch-up performance
- Asynchronous counter
- ESCC
- Single Up Count-Control Line
