MC74HC175ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 35MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 28 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC175ADTR2G Overview
It is embeded in 16-TSSOP (0.173, 4.40mm Width) case. A package named Tape & Reel (TR)includes it. This output is configured with Differential. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. In this case, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 35MHzshould not be exceeded by its output. D latch consists of 1 elements. It consumes 4μA of quiescent Currently, there are 16 terminations. JK flip flop belongs to 74HC175 family. It is powered from a supply voltage of 5V. Input capacitance of this device is 10pF farads. It is a member of the HC/UHfamily of D flip flop. It is mounted by the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. The design is based on 1bits. Vsup reaches 6V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Despite its superior flexibility, it relies on 4 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch operates on 2/6V volts.
MC74HC175ADTR2G Features
Tape & Reel (TR) package
74HC series
16 pins
1 Bits
2/6V power supplies
MC74HC175ADTR2G Applications
There are a lot of ON Semiconductor MC74HC175ADTR2G Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Consumer
- Guaranteed simultaneous switching noise level
- High Performance Logic for test systems
- Single Down Count-Control Line
- Storage Registers
- Bus hold
- Safety Clamp
- Memory
- Frequency Divider circuits
