MC74HC175AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 35MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 28 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC175AN Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at 2V~6Vvolts. A temperature of -55°C~125°C TAis used in the operation. D-Typeis the type of this D latch. FPGAs belonging to the 74HCseries contain this type of chip. It should not exceed 35MHzin terms of its output frequency. The element count is 1 . There is 4μA quiescent consumption. 16terminations have occurred. The object belongs to the 74HC175 family. A voltage of 3V is used to power it. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of HC/UH. There is an electronic component mounted in the way of Through Hole. This board is designed with 16pins on it. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. It is designed with a number of bits of 4. It reaches the maximum supply voltage (Vsup) at 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its superior flexibility is attributed to its use of 4 circuits. A reliable performance of this D flip flop makes it well suited for use in RAIL. In order for the device to operate, it requires 2/6V power supplies.
MC74HC175AN Features
Tube package
74HC series
16 pins
4 Bits
2/6V power supplies
MC74HC175AN Applications
There are a lot of ON Semiconductor MC74HC175AN Flip Flops applications.
- Frequency Divider circuits
- Latch-up performance
- Frequency division
- Balanced Propagation Delays
- Registers
- Matched Rise and Fall
- Differential Individual
- Balanced 24 mA output drivers
- Buffer registers
- Counters
