MC74HC175ANG
| Parameters | |
|---|---|
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 35MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 28 ns |
| Family | HC/UH |
MC74HC175ANG Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). The Tubepackage contains it. It is configured with Differentialas an output. Positive Edgeis the trigger it is configured with. Through Holeis positioned in the way of this electronic part. A voltage of 2V~6Vis used as the supply voltage. In the operating environment, the temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. The 74HCseries comprises this type of FPGA. A frequency of 35MHzshould not be exceeded by its output. A total of 1 elements are present. As a result, it consumes 4μA of quiescent current without being affected by external factors. There are 16 terminations,This D latch belongs to the family of 74HC175. A voltage of 5V provides power to the D latch. Input capacitance of this device is 10pF farads. This D flip flop belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Through Hole. This board is designed with 16pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 1bits are used in this part. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. Using 4 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for RAIL. In order for the device to operate, it requires 2/6V power supplies.
MC74HC175ANG Features
Tube package
74HC series
16 pins
1 Bits
2/6V power supplies
MC74HC175ANG Applications
There are a lot of ON Semiconductor MC74HC175ANG Flip Flops applications.
- Buffered Clock
- High Performance Logic for test systems
- Single Down Count-Control Line
- Matched Rise and Fall
- Convert a momentary switch to a toggle switch
- Control circuits
- Frequency Dividers
- Shift registers
- Buffer registers
- Storage registers
