MC74HC259ADG
| Parameters | |
|---|---|
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 8 |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | D-Type |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 4 |
| Independent Circuits | 1 |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
MC74HC259ADG Overview
It is embedded in the 16-SOIC (0.154, 3.90mm Width) package. A package of Tube has been used. It uses Standard as its output configuration. There is D-Type, Addressable logic type for this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates at a voltage of 2V~6V. It operates at -55°C~125°C degrees Celsius. In the 74HC series, this FPGA is located. This electronic part is designed with 8 Bits. In this device, there are 16 terminations. It is a member of the 74HC259 family. A 3V voltage supply is required for operation. 16 pins are available on it. This electronic device is categorized as a HC/UH electronic device. 16 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. There is a subcategory of FF/Latches for this part. When Vsup reaches 6V, the maximal supply voltage is reached. A total of 2/6V power supplies are needed to run it. It is recommended that the supply voltage (Vsup) be greater than 2V. There are electronic circuits attached to the 4 input lines. As a result of its reliable performance, it is well suited for RAIL.
MC74HC259ADG Features
16-SOIC (0.154, 3.90mm Width) package
74HC series
8 Bits
74HC259 family
16 pin count
16 pins
2/6V power supplies
MC74HC259ADG Applications
There are a lot of ON Semiconductor MC74HC259ADG Latches applications.
- Programmable binary
- Counting
- Parallel data synchronization
- Control circuits
- Storage
- Frequency dividing
- Registers
- High-speed logic
- Pattern generators
- Up-Down Johnson
