MC74HC259ADTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | D-Type |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type, Addressable |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 42 ns |
| Trigger Type | LOW LEVEL |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC259ADTG Overview
A package called 16-TSSOP (0.173, 4.40mm Width) contains it. It is packaged in the way of Tube. It uses the output configuration Standard. D-Type, Addressable is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. A 2V~6V supply voltage is required to operate it. A temperature of -55°C~125°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. The electronic part in this image has 8 bits. A device with this design has 16 terminations. It is a member of the 74HC259 family. In order to operate it, the supply voltage must be 5V. There are 16 pins attached to it. HC/UH is the family of this electronic device. The device has 16 pins. Surface Mount is the way in which this electronic part is mounted. Subcategory FF/Latches contains this part. Vsup reaches 6V as the maximum supply voltage. 2/6V power supplies are needed to operate it. It is recommended that the supply voltage (Vsup) be greater than 2V. This device is well suited for RAIL based on its reliable performance.
MC74HC259ADTG Features
16-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC259 family
16 pin count
16 pins
2/6V power supplies
MC74HC259ADTG Applications
There are a lot of ON Semiconductor MC74HC259ADTG Latches applications.
- Automotive Cluster
- Buffer/Storage Registers
- Four-bit storage with output enable
- Up/down difference counting
- Flip-flops
- Display driver
- Shift right register
- Pattern generators
- Address register
- Counter
