MC74HC273ADT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC273 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 145 ns |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC273ADT Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. Package Tubeembeds it. T flip flop uses Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74HCseries FPGA. You should not exceed 35MHzin its output frequency. The list contains 1 elements. This process consumes 4μA quiescents. A total of 20terminations have been recorded. JK flip flop belongs to 74HC273 family. Power is provided by a 3V supply. Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. An electronic part with 8bits has been designed. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. Its superior flexibility is attributed to its use of 8 circuits. Considering its reliability, this T flip flop is well suited for RAIL. In order for the device to operate, it requires 2/6V power supplies.
MC74HC273ADT Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC273ADT Applications
There are a lot of ON Semiconductor MC74HC273ADT Flip Flops applications.
- Computing
- Synchronous counter
- Single Up Count-Control Line
- Shift registers
- EMI reduction circuitry
- Frequency Divider circuits
- Counters
- QML qualified product
- Computers
- Supports Live Insertion
