MC74HC273ADW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 220 ns |
| fmax-Min | 24 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
MC74HC273ADW Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. In the configuration, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is at -55°C~125°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74HCseries of FPGAs. There should be no greater frequency than 35MHzon its output. D latch consists of 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 3V provides power to the D latch. Electronic devices of this type belong to the HC/UHfamily. The maximal supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V.
MC74HC273ADW Features
Tube package
74HC series
MC74HC273ADW Applications
There are a lot of Rochester Electronics, LLC MC74HC273ADW Flip Flops applications.
- Computers
- Memory
- Individual Asynchronous Resets
- Buffered Clock
- Divide a clock signal by 2 or 4
- Registers
- Memory
- Storage Registers
- High Performance Logic for test systems
- Computing
