MC74HC273ANG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC273 |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 220 ns |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 8 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 3.556mm |
| Length | 27.1526mm |
| Width | 6.604mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC273ANG Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. It is included in the package Tube. The output it is configured with uses Non-Inverted. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates at 2V~6Vvolts. It is operating at a temperature of -55°C~125°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. There have been 20 terminations. Members of the 74HC273family make up this object. A voltage of 3V provides power to the D latch. Input capacitance of this device is 10pF farads. This D flip flop belongs to the family of HC/UH. There is an electronic component mounted in the way of Through Hole. There are 20pins on it. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. Flip flops designed with 8bits are used in this part. There is a 6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 8 circuits. As a result of its reliability, this D flip flop is ideally suited for RAIL. The power supply is 2/6V. With an output current of 7.8mA, it is possible to design the device in any way you want. There are 8 output lines on it.
MC74HC273ANG Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC273ANG Applications
There are a lot of ON Semiconductor MC74HC273ANG Flip Flops applications.
- Memory
- Test & Measurement
- Data storage
- Frequency Divider circuits
- Modulo – n – counter
- Frequency division
- Convert a momentary switch to a toggle switch
- Functionally equivalent to the MC10/100EL29
- Registers
- Balanced Propagation Delays
