MC74HC373ADT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 21 ns |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC373ADT Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. A Tube package is used to package it. Tri-State is the output configured for it. There is D-Type Transparent Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. A voltage of 2V~6V is used as the supply voltage for this device. There is a temperature of -55°C~125°C at which the system operates. An FPGA of this type belongs to the 74HC series. The design of this electronic part contains 8 bits. In this device, there are 20 terminations that have been designed. The family 74HC373 includes it. The device works with a voltage of 3V for its supply voltage. With 20 pins, it is equipped. HC/UH is the family of this electronic device. The pin configuration of the device is 20. Surface Mount is used to mount this electronic part. This device has a total of 2 ports. This part can be found within the FF/Latches subcategory. 6V is the maximum voltage (Vsup) that can be supplied. There is 2/6V power supply for it. A supply voltage (Vsup) greater than 2V is required. There are electronic circuits attached to the 3 input lines. On the basis of its reliability, this device is well suited for RAIL.
MC74HC373ADT Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
MC74HC373ADT Applications
There are a lot of ON Semiconductor MC74HC373ADT Latches applications.
- General-Purpose Register
- PCs and Notebooks
- Instrumentation
- Avionics
- Pattern generators
- Automotive Infotainment
- Counter
- Stacked or Push-Down Registers
- Registers
- Parallel data storage
