Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Published |
2005 |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
RAIL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74HC373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
7.8mA |
Number of Bits |
8 |
Propagation Delay |
21 ns |
Turn On Delay Time |
21 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Halogen Free |
Halogen Free |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.006 A |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Height |
1.05mm |
Length |
6.6mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74HC373ADTG Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Tube is the way it is packaged. It uses Tri-State as the output. This electrical device has a logic type of D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The voltage supply is 2V~6V. A temperature of -55°C~125°C is set as the operating temperature. The 74HC series contains FPGAs of this type. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. The family 74HC373 includes it. With the supply voltage set at 3V, it is able to operate. There are 20 pins on it. This electronic device is categorized as a HC/UH electronic device. There are 20 pins on it. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 6V. 2/6V power supplies are needed to operate it. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. There are electronic circuits attached to the 3 input lines. On the basis of its reliability, this device is well suited for RAIL. With an output current of 7.8mA, it is highly flexible in terms of design.
MC74HC373ADTG Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
MC74HC373ADTG Applications
There are a lot of ON Semiconductor MC74HC373ADTG Latches applications.
- Serial Input
- Registers
- Up-Down Johnson
- Communication systems
- Data acquisition
- A/D converters
- Display driver
- Parallel Output
- Shift right with parallel loading
- Shift Registers