Parameters |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
225 ns |
Turn On Delay Time |
21 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Halogen Free |
Halogen Free |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.006 A |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Length |
6.5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74HC373 |
Pin Count |
20 |
MC74HC373ADTR2G Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as the output. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 2V~6V, it operates. There is a temperature of -55°C~125°C at which the system operates. The 74HC series is associated with this FPGA. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74HC373 family, it falls under that category. In order to function, the supply voltage should be set to 3V. With 20 pins, it is equipped. It is part of the family of electronic devices called HC/UH. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. 6V is the maximum supply voltage (Vsup). A total of 2/6V power supplies are required for it to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. In the circuit, there are 3 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is suitable for TAPE AND REEL.
MC74HC373ADTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
MC74HC373ADTR2G Applications
There are a lot of ON Semiconductor MC74HC373ADTR2G Latches applications.
- Parallel Input
- A/D and D/A conversion
- Buffer register
- Counter timers
- Relay replacement
- Frequency dividing
- Network Switches
- Counting
- Shift left register
- Avionics