MC74HC373AFG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 21 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC373AFG Overview
In the package 20-SOIC (0.209, 5.30mm Width), it can be found. The package is in the form of Tube. It uses the output configuration Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. There is no supply voltage for this device. During operation, the temperature is set at -55°C~125°C. The 74HC series contains FPGAs of this type. The design of this electronic part is based on 8 bits. A device with this design has 20 terminations. It is a member of the 74HC373 family. The device is operated when the supply voltage is set to 3V. With 20 pins, it is equipped. This electronic device is categorized as a HC/UH electronic device. With the design of the board, there are only 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. Vsup reaches 6V as the maximum supply voltage. The system is powered by 2/6V sources. A voltage greater than 2V must be supplied as a power supply (Vsup). Based on its reliable performance, this device is suitable for RAIL. A binary equivalent of the input line is generated by the 3 output lines. The quiescent current consumed by it is 4μA because it is unaffected by external factors. To achieve its exceptional flexibility, it relies on 8 circuits.
MC74HC373AFG Features
20-SOIC (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
MC74HC373AFG Applications
There are a lot of ON Semiconductor MC74HC373AFG Latches applications.
- Counter timers
- Up-Down Johnson
- Automotive HEV/EV Powertrain
- Phase comparator
- Watches
- Instrumentation
- Parallel-to-Serial Data Conversion
- Registers
- Display
- High-speed logic
