MC74HC374ADT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 35MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
MC74HC374ADT Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). It is contained within the Tubepackage. In the configuration, Tri-State, Non-Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. Currently, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74HCseries of FPGAs. It should not exceed 35MHzin terms of its output frequency. A total of 1 elements are present. As a result, it consumes 4μA quiescent current and is not affected by external forces. The input capacitance of this JK flip flopis 10pF farads.
MC74HC374ADT Features
Tube package
74HC series
MC74HC374ADT Applications
There are a lot of Rochester Electronics, LLC MC74HC374ADT Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter
- Single Down Count-Control Line
- Bounce elimination switch
- Control circuits
- Reduced system switching noise
- Bus hold
- Data transfer
- Registers
