MC74HC374ADTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Clock Frequency | 35MHz |
| Propagation Delay | 125 ns |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop, Latch |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC374ADTG Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. Temperature is set to -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. A frequency of 35MHzshould be the maximum output frequency. The element count is 1 . It consumes 4μA of quiescent current without being affected by external factors. There have been 20 terminations. Members of the 74HC374family make up this object. The D flip flop is powered by a voltage of 3V . Its input capacitance is 10pFfarads. Electronic devices of this type belong to the HC/UHfamily. In this case, the electronic component is mounted in the way of Surface Mount. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. 6Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. As a result of its reliable performance, this T flip flop is suitable for RAIL. An electrical current of 2/6V volts is applied to it. The flip flop has 2embedded ports. This T flip flop features a maximum design flexibility due to its output current of 7.8mA. A total of 3input lines have been provided. It is of 4 channels.
MC74HC374ADTG Features
Tube package
74HC series
20 pins
2/6V power supplies
MC74HC374ADTG Applications
There are a lot of ON Semiconductor MC74HC374ADTG Flip Flops applications.
- Data transfer
- Consumer
- Digital electronics systems
- Common Clocks
- Shift registers
- Load Control
- Patented noise
- ESD protection
- ATE
- Memory
