MC74HC374ADWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 225 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC374ADWG Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. As part of the package Tube, it is embedded. The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. It is operating at a temperature of -55°C~125°C TA. D-Typeis the type of this D latch. The 74HCseries comprises this type of FPGA. Its output frequency should not exceed 35MHz Hz. D latch consists of 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74HC374 family. An input voltage of 3Vpowers the D latch. This JK flip flop has a 10pFfarad input capacitance. A device of this type belongs to the family of HC/UH. There is an electronic component mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. 8bits are used in its design. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 2V. As a result of its reliability, this D flip flop is ideally suited for RAIL. A total of 2/6V power supplies are needed to run it. The D flip flop has no ports embedded. This T flip flop features a maximum design flexibility due to its output current of 7.8mA. There are 3 output lines in this JK flip flop. There is 4μA quiescent current consumption by it. 8 channels are available.
MC74HC374ADWG Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC374ADWG Applications
There are a lot of ON Semiconductor MC74HC374ADWG Flip Flops applications.
- Control circuits
- ESD protection
- ESD performance
- Individual Asynchronous Resets
- Buffered Clock
- Differential Individual
- Bus hold
- Storage registers
- EMI reduction circuitry
- Data transfer
