MC74HC374AFG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 125 ns |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
MC74HC374AFG Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. You can find it in the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. A supply voltage of 2V~6V is required for operation. It is operating at a temperature of -55°C~125°C TA. D-Typeis the type of this D latch. The 74HCseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 35MHz. A total of 1elements are present in it. T flip flop consumes 4μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74HC374family make up this object. A voltage of 3V provides power to the D latch. Input capacitance of this device is 10pF farads. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. 8 circuits are used to achieve its superior flexibility. This D flip flop is well suited for RAIL based on its reliable performance. An electrical current of 2/6V volts is applied to it. The D flip flop has no ports embedded. There are 3 output lines on it.
MC74HC374AFG Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC374AFG Applications
There are a lot of ON Semiconductor MC74HC374AFG Flip Flops applications.
- Pattern generators
- Guaranteed simultaneous switching noise level
- 2 – Bit synchronous counter
- Consumer
- Latch-up performance
- Buffer registers
- Divide a clock signal by 2 or 4
- Convert a momentary switch to a toggle switch
- Frequency division
- Shift Registers
