MC74HC377ADTG
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 1.5 ns |
| Turn On Delay Time | 27 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
MC74HC377ADTG Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. D flip flop is embedded in the Tube package. The output it is configured with uses Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. A 2V~6Vsupply voltage is required for it to operate. Temperature is set to -55°C~125°C TA. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. A frequency of 35MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74HC377 family. The D flip flop is powered by a voltage of 5V . Its input capacitance is 10pFfarads. It belongs to the family of electronic devices known as HC/UH. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. 8bits are used in its design. There is a 6Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Considering the reliability of this T flip flop, it is well suited for RAIL. The system runs on a power supply of 2/6V watts. This input has 8lines.
MC74HC377ADTG Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC377ADTG Applications
There are a lot of ON Semiconductor MC74HC377ADTG Flip Flops applications.
- Bus hold
- 2 – Bit synchronous counter
- Buffered Clock
- Memory
- Test & Measurement
- Storage Registers
- Instrumentation
- Clock pulse
- Automotive
- Frequency Dividers
