MC74HC377ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 1.5 ns |
| Turn On Delay Time | 27 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MC74HC377ADTR2G Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. D flip flop is included in the Tape & Reel (TR)package. As configured, the output uses Non-Inverted. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -55°C~125°C TA. The type of this D latch is D-Type. It belongs to the 74HCseries of FPGAs. It should not exceed 35MHzin terms of its output frequency. In total, it contains 1 elements. There is a consumption of 4μAof quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74HC377. The power supply voltage is 5V. Its input capacitance is 10pF farads. An electronic device belonging to the family HC/UHcan be found here. Electronic part Surface Mountis mounted in the way. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 8bits. Vsup reaches 6V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It runs on 2/6Vvolts of power. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
MC74HC377ADTR2G Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC377ADTR2G Applications
There are a lot of ON Semiconductor MC74HC377ADTR2G Flip Flops applications.
- Synchronous counter
- Clock pulse
- High Performance Logic for test systems
- ESD protection
- Supports Live Insertion
- Functionally equivalent to the MC10/100EL29
- Pattern generators
- Buffer registers
- Convert a momentary switch to a toggle switch
- Digital electronics systems
