MC74HC377ADWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 1.5 ns |
| Turn On Delay Time | 27 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC377ADWG Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. D flip flop is included in the Tubepackage. This output is configured with Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. A temperature of -55°C~125°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. The 74HCseries comprises this type of FPGA. You should not exceed 35MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current. A total of 20 terminations have been made. It is a member of the 74HC377 family. A voltage of 5V provides power to the D latch. Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. The design is based on 8bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be kept above 2V. As a result of its reliability, this D flip flop is ideally suited for RAIL. The system runs on a power supply of 2/6V watts. It is reported that there are 8 input lines.
MC74HC377ADWG Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC377ADWG Applications
There are a lot of ON Semiconductor MC74HC377ADWG Flip Flops applications.
- Cold spare funcion
- Dynamic threshold performance
- Latch-up performance
- Frequency division
- Supports Live Insertion
- Patented noise
- Clock pulse
- Buffer registers
- ESCC
- Digital electronics systems
