MC74HC393ADR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Packaging | Cut Tape (CT) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 44 ns |
| Turn On Delay Time | 300 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Number of Bits per Element | 4 |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC393ADR2 Overview
In the SOICpackage, it is supplied. Using 14terminations, it can be configured. With a supply voltage of 3V volts, it is possible to run it in a fully flexible manner. In this diagram, there are 2elements that are interconnected by wires. In total, there are 14pins on the component. In this case, it is packaged as Cut Tape (CT). Circuit components are connected by 14pins. The way of Surface Mount is used to mount it. Initially, it appears to belong to the HC/UH family. The array stores 4bits in each element. In this device, the temperature grade is MILITARY. For its packaging, TAPE AND REELis employed. The electrical characteristics remain stable at maximum temperature 125°Cfor extended periods. Generally, the temperature range of the device is set at -55°C. The maximum voltage that can be applied to the device is 6V. As low as 2Vis the minimum voltage that can be applied to the device. The 1input lines are used to input binary data as on/off signals.
MC74HC393ADR2 Features
Embedded in the SOIC package
4 bits per element
MC74HC393ADR2 Applications
There are a lot of ON Semiconductor MC74HC393ADR2 Counters & Dividers applications.
- Clocks
- Programmable binary and decade
- Dual Up Counters
- Time delay circuits
- DIVISION
- TRUE RMS-TO-DC CONVERSION
- Frequency dividing circuits
- ALGEBRAIC COMPUTATION
- Control counters
- Digital multiplexing and demultiplexing
