MC74HC393ADTR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 44 ns |
| Turn On Delay Time | 300 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 50MHz |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC393ADTR2 Overview
The device is packaged in the 14-TSSOP (0.173, 4.40mm Width)type. There are 14 terminations used for its configuration. The supply voltage of 3V permits it to operate with full flexibility. In this diagram, there are 2elements that are interconnected by wires. The total number of component pins is 14. As a result, it is packaged in the way of a Tape & Reel (TR). As part of the circuit, there are 14pins used to connect other components. The way of Surface Mount is used to mount it. It emerges as a member of HC/UH family. With its 74HCseries designation, it can be used for a range of applications. Binary Counteris used as the logic type. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in a Surface Mountmanner. By providing the supply voltage of [0], it is capable of operating more reliably. The array stores 4bits in each element. Further related parts can be found under its base part number 74HC393. In order to package it, TAPE AND REELis employed. Supply voltage (Vsup) can be as low as 2V. Up to a maximum voltage of 6Vcan be supplied (Vsup). A total of 1input lines are used to input binary data.
MC74HC393ADTR2 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
MC74HC393ADTR2 Applications
There are a lot of ON Semiconductor MC74HC393ADTR2 Counters & Dividers applications.
- LINEARIZATION
- Programmable decade counters
- Control counters
- Counter control/timers
- Clocks
- Divide-by"N" counters/frequency synthesizers
- Up Counters
- Binary counter/decoder
- Timers
- Time-delay circuits
