MC74HC4020ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC4020 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 115 ns |
| Turn On Delay Time | 115 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Number of Output Lines | 12 |
| fmax-Min | 40 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC4020ADG Overview
A 16-SOIC (0.154, 3.90mm Width)package is used for this device. It is configured with 16terminations. With a supply voltage of 3V volts, it is possible to run it in a fully flexible manner. The number of all component pins is 16. There is a package in the form of Tube. There are 16 pins going on to connect other parts in the circuit. It is mounted in the direction of [0]. The HC/UHfamily is derived from it. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. It is adopted that the logic type is [0]. -55°C~125°Cis the recommended operating temperature. The mounting type is Surface Mount. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. There are 14bits stored in each element of the array. Using the Pbfree code, the result may be yes. Under its base part number of [0], you will find additional related parts. RAIL is employed for its packing. In this case, 2/6Vvoltage is generated by the voltage source. The minimum supply voltage (Vsup) is 2V. 50MHzis the frequency of operation. Typically, the supply voltage (Vsup) is limited to 6V. There are 1 input lines that allow binary data to be input in the form of an on/off signal. As far as output lines are concerned, it has [0].
MC74HC4020ADG Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
14 bits per element
Frequency of 50MHz
MC74HC4020ADG Applications
There are a lot of ON Semiconductor MC74HC4020ADG Counters & Dividers applications.
- Frequency dividers
- Digital multiplexing and demultiplexing
- Timing applications
- Time Out Timer for Consumer-Application Industrial Controls
- Fixed and programmable counters greater than 10
- Time-delay circuits
- DIVISION
- Fixed or Programmable Frequency Division
- Time delay circuits
- Frequency dividing circuits
