MC74HC4020AN
| Parameters | |
|---|---|
| Count Direction | UP |
| Max Frequency@Nom-Sup | 25000000Hz |
| Load/Preset Input | NO |
| Mode of Operation | ASYNCHRONOUS |
| Height Seated (Max) | 4.44mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 14 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 115 ns |
| Family | HC/UH |
| Logic Function | Counter |
| Max I(ol) | 0.004 A |
| Trigger Type | NEGATIVE EDGE |
| Number of Output Lines | 12 |
| fmax-Min | 40 MHz |
MC74HC4020AN Overview
This is a device supplied in the PDIP package. It is configured using 16terminations. The supply voltage of 3V enables it operate in a fully flexible way. A wire connects the 1elements. In all, there are 16 pins on each component. Rail/Tubeis the packaging method used for this package. In the circuit, there are 16pins that connect other components. The device is mounted in the direction of [0]. It emerges as a member of HC/UH family. The device stores 14bits of information. This device is manufactured in the temperature grade of MILITARY. The electrical properties of the device remain stable at a maximum temperature of [0]. It operates over a specified temperature range with a lower limit generally set to -55°C. It reaches 6Vvoltage at its maximum. As low as 2Vis the minimum voltage that can be applied to the device. The device has a total of 12 output lines.
MC74HC4020AN Features
Embedded in the PDIP package
MC74HC4020AN Applications
There are a lot of ON Semiconductor MC74HC4020AN Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Signal gating
- Fixed or Programmable Frequency Division
- VHF, UHF, FM, AM, etc.
- Divide-by-N counting
- Clocks
- Programmable binary and decade
- POWER COMPUTATION
- Counter control/timers
- Time-delay circuits
