MC74HC4051AD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74HC4051A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 80MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 18Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 83ns |
| Switch-off Time-Max | 76ns |
| Signal Current-Max | 0.025A |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4051AD Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operational temperature extended around -55°C~125°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits number 1 make up this analogue multiplexer. Search with MC74HC4051A if you are looking for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. This digital switch can be operated with a current of 40μA. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. A voltage of 6V can be used to operate the electronic component. There are 80MHz bandwidths for data transfer.
MC74HC4051AD Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74HC4051AD Applications
There are a lot of ON Semiconductor MC74HC4051AD Analog Switches & Multiplexers ICs applications.
- HDTV
- Medical Instrumentation
- Avionics
- Data switching
- Digital Cross-Connects
- PCMCIA cards
- Digital cross connects (DSX-1)
- Cable Modem
- Communication systems
- PBX interfaces
