MC74HC4051ADT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4051A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Voltage | 6V |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 160 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 130pF |
| On-state Resistance Match-Nom | 18Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 76ns |
| Signal Current-Max | 0.025A |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC4051ADT Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -55°C~125°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 8 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. It consists of 1 circuits. If you are looking for variants of the digital switch, trying search with MC74HC4051A. Internally, this switch multiplexer has a resistance of 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The digital multiplexer has a low cost Dual, Single supply. There should be 2V voltage fed to the electrical part below 2V. The analogue multiplexer could operate on 40μA current. Despite this switch's dual supply capability, its voltage should not exceed 6V. For dual power supplies, a voltage of at least 1V should be attached. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. In order to operate the 8 inputs, there are several steps to follow. It is possible to transfer data over a 80MHz-bandwidth.
MC74HC4051ADT Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74HC4051ADT Applications
There are a lot of ON Semiconductor MC74HC4051ADT Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- High speed data transmission line cards
- Optical Applications
- Communications systems
- Precision data acquisition
- Access Concentrators
- PDAs
- Industrial
- Power routing
- DSLAMs
