MC74HC4051ADTR2G

100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4051A 16 Pins 200nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4051ADTR2G
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 948
Description: 100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4051A 16 Pins 200nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	190Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74HC4051A
Pin Count	16
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Power Dissipation	450mW
Propagation Delay	75 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	80MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	130pF
On-state Resistance Match-Nom	18Ohm
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	76ns
Signal Current-Max	0.025A
Height	1.05mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MC74HC4051ADTR2G Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Temperatures around -55°C~125°C TA are extended for operation. The total number of terminations is 16. A 8 channel electronic part produces high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. A 1 circuit is present in this switch device. Try searching for MC74HC4051A variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 190Ohm. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 2V. 40μA current would be enough for this multiplexer to operate. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIf you are using dual power supplies, you should attach at least 1V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. In order to operate the 8 inputs, there are several steps to follow. 80MHz-bandwidths can be used to transfer data between multiplexers.